Results 1 to 4 of 4

Thread: Flywheel / Pressure Plate balancing shop in Montreal ?

  1. #1
    Senior Member FrankyGoes's Avatar
    Join Date
    Feb 2008
    Location
    Montréal
    Posts
    264

    Default Flywheel / Pressure Plate balancing shop in Montreal ?

    I'm replacing the clutch and flywheel in the race car.

    First question : Is it even possible to balance a dual mass flywheel ?
    Second : If its possible is there a reputable shop in Montreal that can balance the flywheel / PP assembly ?

    I would prefer a single mass flywheel but it is unfortunatly not allowed in Sport class :-(

    Thanks.

  2. #2
    Hiding in the bushes Gregster's Avatar
    Join Date
    Feb 2006
    Location
    Pointe Claire QC
    Posts
    2,795

  3. #3
    Senior Member FrankyGoes's Avatar
    Join Date
    Feb 2008
    Location
    Montréal
    Posts
    264

    Default

    Thank you for the reference.
    I will call them next week.

  4. #4
    Senior Member FrankyGoes's Avatar
    Join Date
    Feb 2008
    Location
    Montréal
    Posts
    264

    Default

    I decided not to balance the assembly as the pressure plate was balanced by Clutch Master.
    Everything is installed and there are no vibrations.
    The engagement is quite stiffer than OEM but managable.
    Can't confirm if it's faster on track as too many other things have changed on the car.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •