PDA

View Full Version : [FOUND] Injector Cleaning Place in West island , highly recommended


Davidoff
03-12-2009, 11:20 AM
Hi guys so there is this place in Pointe Claire :

Lew Dieselec
514-694-1491
96 Leacock drive
Pointe-Claire

they clean( + ultrasonic ) and flow test injectors , top/side/fuel/diesel

good bunch of professional people , quick turnaround
http://forums.montrealracing.com/images/smilies/biggthumpup.gif


just got my backup set of rx7 side feed injectors cleaned & Flowtested


usually i send them to RC engineering in the states , but no longer ,
supporting the local economy http://forums.montrealracing.com/images/smilies/smile.gif
PassatVR6
03-12-2009, 11:17 PM
Good to hear, do they offer any other services
Davidoff
03-13-2009, 01:01 AM
..lol adman .. what services do you need .... im sure for the corect ammount they can be persuaded to do... different things

it seems they also rebuild turbos / engines / diesel pumps / and a bunch of other stuff
Davidoff
03-13-2009, 01:03 AM
also get that jetta ready and in battle mode , new and improved FD3S is coming out in a few weeks :) , i got to put al least 10 bussess and a tennis court on you this year :)
PassatVR6
03-13-2009, 05:41 PM
also get that jetta ready and in battle mode , new and improved FD3S is coming out in a few weeks :) , i got to put al least 10 bussess and a tennis court on you this year :)

yeah that rotary motor looked awfully nice when the block was parked on your workbench ;)
Gregster
03-13-2009, 07:40 PM
thats where Wankel engines spend most of their time!!!

Once I raced Adam, He pulled about 5 cars on me. Which is about a bus length. I raced an RX-8, The RX8 was at my door.

Hey Dave remember that time up north on the cruise?
Davidoff
03-14-2009, 04:49 AM
it was on the work bench cuz japaneze engineers r n00bs and forgot to install my exhaust bearings and the valve springs were not stiff enough for me to rev higher than 7k rpm ...
ever since then i upgraded to race cams , bored cylinders and also JE super race F1 high compression pistons , cant wait to finish installing the timing belt and crank it up , hopefully my new titanium valves come in by then as well :)

and that was sick :) up north ... we have to go again , matter of fact as soon as the fd is "upgraded" im heading up for a ride .. im still waiting for some parts to come in :(

and props for holding an rx8 greg .. but they little kids on a straight you know :
with my last summers config ( boosting 3psi under stock boost , but lots of upgrades ) ... racing an rx8 was like racing a d15 eg vs a k20 eg .... no competition
Gregster
03-14-2009, 01:31 PM
it was on the work bench cuz japaneze engineers r n00bs and forgot to install my exhaust bearings and the valve springs were not stiff enough for me to rev higher than 7k rpm ...
ever since then i upgraded to race cams , bored cylinders and also JE super race F1 high compression pistons , cant wait to finish installing the timing belt and crank it up , hopefully my new titanium valves come in by then as well :)

and that was sick :) up north ... we have to go again , matter of fact as soon as the fd is "upgraded" im heading up for a ride .. im still waiting for some parts to come in :(

and props for holding an rx8 greg .. but they little kids on a straight you know :
with my last summers config ( boosting 3psi under stock boost , but lots of upgrades ) ... racing an rx8 was like racing a d15 eg vs a k20 eg .... no competition

This summer will be more interesting. Next week I am getting my Crower Cams and springs... Im really worried about breaking a spring. Actually I'm heading home now to install my SAFC in preperation for all that stuff.
Davidoff
03-14-2009, 02:15 PM
post up some pics :)
yur gonna rev that thing high this summer?
Gregster
03-14-2009, 02:51 PM
post up some pics :)
yur gonna rev that thing high this summer?

Yeah pics will come!

I rev out at around 7800 rpm. But you know its the sustained RPMS that worry me so thats why I am changing springs this year.. i figure might as well change the cams as well. Last year I installed better rockers and lifters in the car.
Emre
03-14-2009, 05:45 PM
Next week I am getting my Crower Cams and springs...Better act fast: Crower filed for bankruptcy and finally closed their doors in February. They are no more.
Gregster
03-14-2009, 06:09 PM
Better act fast: Crower filed for bankruptcy and finally closed their doors in February. They are no more.

You mean Crane Cams and Crane will back soon.
Emre
03-14-2009, 06:16 PM
You mean Crane CamsOops. You're right.