Cutting shoulder belts?

[Gregster]

http://img141.imageshack.us/img141/1111/n54896569538560888965qo7.jpg (http://img141.imageshack.us/my.php?image=n54896569538560888965qo7.jpg)
http://img141.imageshack.us/img141/n54896569538560888965qo7.jpg/1/w600.png (http://g.imageshack.us/img141/n54896569538560888965qo7.jpg/1/)

My problem is that the belts are way to long, it's driving me nuts.

How can I wrap them up. I was using a tie wrap but it didn't look good. So I was thinking about just cutting about 1ft off.

Thoughts?

[FrankyGoes]

I would roll them myself.
Tuck'em just below the roll cage segment. And sow them using red thread.

Reversible.

[Emre]

How can I wrap them up.Roll them up. Slip a tie wrap through the center of the roll.

[bmwqc]

Gregster,

Tie a nice red bow with the excess! :D



http://img141.imageshack.us/img141/1111/n54896569538560888965qo7.jpg (http://img141.imageshack.us/my.php?image=n54896569538560888965qo7.jpg)
http://img141.imageshack.us/img141/n54896569538560888965qo7.jpg/1/w600.png (http://g.imageshack.us/img141/n54896569538560888965qo7.jpg/1/)

My problem is that the belts are way to long, it's driving me nuts.

How can I wrap them up. I was using a tie wrap but it didn't look good. So I was thinking about just cutting about 1ft off.

Thoughts?

[blacksheep]

Gregster,

Tie a nice red bow with the excess! :Dhttp://parkmadisonsalon.com/images/red-bow.jpg

baaaaahahahaha

seriously I think belts are cut with a heated blade because the ends usually look melted. Probably to keep the end from fraying?

[PassatVR6]

I would do like emre said roll up and tie wrap, or use velcro strap.

[johnmdanskin]

You always want to leave a pretty good tail, so you'll always want to have enough to roll up, so just roll them up.