Massive - Alcon Mono6 for e46 M3

[Lee]

Massive is proud to announce the future introduction of a new 14" kit for e36 and e46 race cars, using Alcon's Motorsport version of its well known Mono6 caliper. This specific monobloc race caliper use 7570 aluminum, vs 6061 as found on "road" versions of this caliper as sold by Stasis. Calipers use stainless steel pistons, and no rubber dust boots as the street version. Expect prices under $3500cdn for the front kit.

http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Mono6.jpg

[Emre]

Very nice calipers. I saw these in person on an Evo race car in NJ under 18x9" wheels. The street versions of these calipers came stock on the UK-market Evo VIII MR FQ-400:

http://www.youtube.com/watch?v=s1ZWJjC648I

http://www.ssip.net/upload/mitsubishi-lancer-evolution-viii-mr-fq-400-top-3_124.jpg

You can just about make them out in this pic: http://www.carpw.com/pictures%5Cmitsubishi%5CEvo_8_FQ400_2005_1.jpg

The race versions are also used on the Ralliart-prepped Group N cars. Anyway, all the reviews I've read suggest that these things kick ass.

[Lee]

The e46 and e36 Alcon kits will soon be released. They are low production units and available in limited quantities. The kit uses the higher quality race casting of the Mono6, which is stiffer than the castings as sold by Stasis for the Audi market. These calipers are the race units, not the street calipers with rubber dust boots. BMW 335i kits will also be available soon, with 380mm rotors.

The 355mm e46M3 kit with Alcon caliper is available for $3500cdn. Expect two to three weeks delivery.

http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Alcon_355_front.jpg

[jacclark]

Those look incredible. These are serious race pieces!

[Lee]

Working on caliper mounts to fit an Alcon Mono6 caliper to e36M3 and e46 M3 spindles with 14" discs, whatever the brand of rotors. Will fit Brembo and StopTech-based hats/rotors... 355mm is 355mm. Offset will be tuned with stainless shims.