Massive brakes for most BMWs

[Lee]

Competition brake kits

2002 - Front 300mm x 32mm - Rear 300mm x 21mm
e21 - Front 300mm x 32mm - Rear 300mm x 21mm
e30 - Front 300mm x 21mm + 32mm - Rear 300mm x 32mm
e30 M3 - Front 300mm x 32mm, 332mm x 32mm - Rear 310mm x 32mm
e36 - Front 332mm x 32mm, 355mm x 32mm - Rear 310mm x 32mm
e46 - Front 332mm x 32mm, 355mm x 32mm - Rear 310mm x 32mm

Coming soon
Rear Z3 and 318Ti - 310mm x 32mm
Front e24-e28-e34 - 332mm x 32mm

Outdated website :o www.massivebrakes.com

e46 M3 14" with SL6R-14 caliper.
http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/e36e46-14_2.jpg

Soon available with W6A caliper for all-out racecars.
http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Caliper_5.jpg

W6A caliper. Available with 4 pistons too. Same price.
http://www.wilwood.com/Products/001-Calipers/036-w6a/wa_big.jpg

Rear e36 310mm x 32mm
http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Reare36-e46_Rear_2.jpg

[byeyou]

do you have anything for e34's????

thank's

[Emre]

What's the difference between the SL6R-14 and the W6A calipers? I find Wilwood's product line a bit confusing at times!

Emre

[Lee]

What's the difference between the SL6R-14 and the W6A calipers? I find Wilwood's product line a bit confusing at times!

Emre

W6A on the left. Much bigger. Fits 14" rotors with 50mm tall pads. Pads are huge. That caliper is at par with AP Racing's CP5200. And much better for racing, than Brembo's F40 or StopTech's. No rubber boots to melt and no aluminum pistons to boil the brake fluid. Those have stainless steel pistons, just as the two other SL6R and SL6R-14 calipers.

SL6R in the center. Great race caliper for 11.75" to 13". Uses 40mm tall pads.

SL6R-14 on the right. Very commonly used in most BBK sold on the market. being thinner, it allows better fit for non-race wheels.

http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/3_calipers.jpg

http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Caliper_3.jpg

http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Caliper_2.jpg

http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Caliper_1.jpg

http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Caliper_4.jpg

[Lee]

do you have anything for e34's????

thank's

I have had the drafts for 3 years, but no time to make a production. Kit would be with SL6R calipers (thicker pads) and 13" x 1.25" (332mm x 32mm) rotors. I need 5 orders. Fit of the bigger brakes is easy on e34s as the hats and rotors are deep inside. But 17" wheels still required. Even though I suspect it could work on certain 16"...

[Lee]

Here are a few shots of the rear e36-e46 kit with 12.2" x 1.25" rotors and 4 pistons race calipers. First batch is for racing only. Emergency brake steel ring available later.

http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Rear-e36-e46_1.jpg
http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Rear-e36-e46_3.jpg
http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Rear-e36-e46_2.jpg
http://img.photobucket.com/albums/v668/Lee_Vuong/The%20Parts%20Factory/Rear-e36-e46_5.jpg